Description
T1000™ Stampable Overlay is a polymer modified cementitious topping formulated for resurfacing structurally sound, non-moving concrete floors and exterior hardscapes. The overlay provides a durable surface suitable for stamping with Concrete stamps or Texture Rollers. The cured product creates an abrasion resistant surface suitable for pedestrian and automobile traffic. It is an ideal system for restoring worn or color-blemished concrete, out of level surfaces or correcting construction errors. Properly applied to clean and sound concrete, T1000™ Stampable Overlay is freeze/thaw resistant. 21-day compressive strength is 5250 psi (36.2 MPa).|
T1000™ Stampable Overlay is a precise blend of graded sand, cement, and polymer, which allow for thin applications. It is a pre-packaged material that is mixed on the job site with clean water and can be stamped textured or roller textured. Application thickness ranges from 1/8 inch (3mm) to a maximum of 1/2 inch (13 mm).
T1000™ Stampable Overlay is packaged in medium gray. This base color may be colored with a Uni-Mix®Color Pack. 24 colors are available. Refer to the Uni-Mix® Integral Colorant color chart for available colors. Colors are formulated for use with T1000™ Stampable Overlay medium gray unless noted otherwise. Custom colors and colors selected from the Perma-Cast® Shake-on Color Hardener color chart can be formulated with ample lead-time.
T-1000 Stampable Overlay must be used with T-1000 Primer
Gabriel Montoya (verified owner) –
stamped concrete supplies was very efficient with the shipping and reasonable with the product price and the shipping price. and it got here within one week and i ordered three pallets. T-1000 is very user friendly and stamps very nice, the only reason i didnt give it 5 stars is because of the strength of the product. its cracks sometimes and its not as strong as the overlay product i usually use which is thincrete, but thincrete is harder to use so they both have pros and cons.