form-liners-patterns-TOP-Banner
Form Liners Vertical Block 1407

Click for Gallery

FORMLINERS
8″ x 16″ Split Face Block – Pattern #1407
Formliner Texture
Standard split faced CMU block 3/8″ mortar joint

GENERAL INFORMATION

ATTACHMENT TO FORMWORK: Liners are attached to the form using TEK screws through the face of the liner. Optional form mounting T-nuts embedded through the plywood backing is available for Elastospec panels.

FORM RELEASE: Apply with low flow, wide angle, flat spray nozzle and wipe with a cloth to insure a complete even coat to the entire form liner surface. Do not over apply form release agent. Protect treated form liners from precipitation, dust, and debris. Do not apply to reinforcing steel. Most VOC compliant form releases are approved for all form liner materials.

form liner concrete pattern texture 1502

Click for Gallery

FORMLINERS
Ashlar Stone – Pattern #1502
Formliner Texture
Rock Sizes:  2-1/2″ to 9″  (1-1/4″ depth, 3/8″ to 1-1/4″ mortar joint)

GENERAL INFORMATION

ATTACHMENT TO FORMWORK: Liners are attached to the form using TEK screws through the face of the liner spaced 12″ C-C. Optional form mounting T-nuts embedded through the plywood backing is available for Elastospec panels.

FORM RELEASE: Apply with low flow, wide angle, flat spray nozzle and wipe with a cloth to insure a complete even coat to the entire form liner surface. Do not over apply form release agent. Protect treated form liners from precipitation, dust, and debris. Do not apply to reinforcing steel. Most VOC compliant form releases are approved for all form liner materials.

forml liner concrete pattern texture 1608

Click for Gallery

FORMLINERS
Split Slate – Pattern #1608
Formliner Texture
1/4″ deep split slate

GENERAL INFORMATION

ATTACHMENT TO FORMWORK: Liners are attached to the form using TEK screws through the face of the liner spaced 12″ C-C. Optional form mounting T-nuts embedded through the plywood backing is available for Elastospec panels.

FORM RELEASE: Apply with low flow, wide angle, flat spray nozzle and wipe with a cloth to insure a complete even coat to the entire form liner surface. Do not over apply form release agent. Protect treated form liners from precipitation, dust, and debris. Do not apply to reinforcing steel. Most VOC compliant form releases are approved for all form liner materials.

6-inch-Stackable-Cobblestone-Form-Liner

Click for Gallery

FORMLINERS
6″ Stackable Cobblestone Form Liner
Formliner Texture

GENERAL INFORMATION

• Individual 6″ liners can be stacked to various desired heights.
• End piece sets designed for simplified forming of 8″ or 10″ thick walls.
• Two unique liners (A & B) and an offset liner available to minimize repetition
• Control Joint Texture Strip to help control random cracking in the wall

Dimensions: Refer to the tool images below
Grout Line Width: 3/16″ – 3/8″
Grout Line Depth: 1/16″ – 3/8″

Available Tools:
6″ Stackable Cobblestone Form Liner A – BFL50068A
6″ Stackable Cobblestone Form Liner B – BFL50068B