Brickform-Blush-Tone-Acid-StainBlush-Tone Acid Stain

Brickform-Blush-Tone-Acid-Stain-Color-ChartBlush-Tone Color Chart

Blush-Tone Acid Stain

Brickform  Blush-Tone Acid Stain

BRICKFORM Blush-Tone Acid Stain, Chemical Stain For Concrete, reacts with minerals that exist in newly cured or existing concrete, penetrating the very top layer of the concrete surface with color that will not chip, crack, or peel. The colors produced in each section of concrete will be unique with captivating, multi-colored intensities that become a permanent part of the concrete. BRICKFORM Blush-Tone Acid Stain is available in 10 standard colors.


Brickform Blush-Tone Acid Stain Video Demo


technical data sheet

Perma-Cast® Sierra Stain™

  • Available in 7 standard colors, with 4 colors available for exterior use.
  • A concentrated penetrating reactive stain that chemically combines with cured concrete to produce permanent, variegated coloring effects.
  • Packaged in 1-gallon (3.8 L) bottles of concentrate, with recommended application diluted with one gallon of water.
  • At diluted strength coverage is approximately 200-300 square feet per gallon, but varies with surface conditions.
    A second application is recommended.
  • Wide color variations, mottling, and unevenness of the color is normal and to be expected.

Perma-Cast Acid Stain

Perma-Stain Sierra Stain Application Photo

Surfkoat-Concentrated-Acid-StainsSurfkoat Acid Stain
technical data sheet

Surfkoat Concentrated Acid Stain

SurfKoat Concentrated Concrete Floor Stains are a group of organic colored acid concrete stains. The final brilliant re-sults are unmatched by any other process and leave an antique patina type finish. They react chemically with the mineral content and excess lime of the concrete surface for a deep penetrating permanent stain. All of these stains are UV stable when sealed. Use interior or exterior. SurfKoat Concentrated Concrete Floor Stains may be diluted up to 1:1 with water.


About Acid Stain
Metropolitan Concrete Products

Acid stains can be used on concrete that is cleaned, has not yet been sealed, and is not too age deteriorated. We recommend our Metropolitan Concrete Products brand SURF PREP. They are available in a variety of colors and come in 1 gallon containers. The stain reacts chemically with the concrete surface to produce a patina rustic look that will not chip or peel. Always test the color to be achieved before applying to the entire surface. After the concrete has cured for a minimum of three days, apply the stain with a sponge, sprayer, or brush in equal amounts and uniformity. After 6 to 8 hours, rinse, and check coloration.

If further coloration is desired, apply a second coat of stain. Generally, two coats of the same or different color of stain are desirable to achieve richer looking tones. Once desired tone is achieved, neutralize with a baking soda or ammonia solution, such as our product BALANCE, rinse with clear water and allow to dry. Then seal with an acrylic sealer, we recommend our product EVERSHIELD, or for indoor high traffic areas, use a 2 part epoxy sealer or urethane, we recommend our product HP 250 CYCLO. Each gallon of acid stain covers approximately 300 sq ft per coat.

Working with Acid Based Stains Video Demo

Concentrated Acid Stains technical data sheet


Surfkoat Surf-Prep technical data sheet

Surf Prep – Micro Etcher/Concrete Cleaner

Surfkoat Surf-Prep

Surf-Prep is an economical, concentrated acid based micro etching solution designed for superior profiling of unsealed slick trowel concrete surfaces. It provides the necessary characteristics to properly profile a floor prior to applying stain or other coatings without the harsh hazards of using muriatic acid. Surf-Prep slightly opens the pores to allow adequate adhe-sion for concrete coatings, and better acid staining color development and reaction.

It’s excellent cleaning properties allow removal of mud stains, rust, and corrosion deposits from a multitude of concrete substrates.



Surfloat Balance technical data sheet

Balance Neutralizer

Surfkoat Balance Neutralizer

Balance is a superior blend of neutralizing agents and specialty additives which create a solution unmatched in the industry. Balance neutralizes residues left from acid based stains and other acid based products used on con-crete for cleaning and preparing purposes, such as muriatic acid. A concrete surface with a neutral pH is required for pretty much all coatings to properly adhere to the substrate.

Balance does neutralize the surface, but also con-tains a special additive which not only results in excellent coating adhesion, but enhances acid stain applications.




Surfkoat Citrus Degreaser technical data sheet

Citrus Degreaser – Concrete Surface Cleaner

Surfkoat Citrus Degreaser

Citrus Degreaser is an environmentally safe, citrus based, biodegradable, concentrated concrete degreaser and cleaner designed to remove even the toughest deposits of dirt, grease, grime, oil stains, and other contaminating fluids from concrete surfaces.

Citrus Degreaser is formulated to be used in exterior and interior applications for general clean up and as a pre cleaning solution prior to etching or mechanically preparing a concrete surface.


  • Citrus Based Concrete Degreaser
  • Biodegradable Formulation
  • Concentrated Formula
  • Quickly Dissolves Grease & Motor Oil

We Sell the Concrete Industry’s Top Brands!

  • brickform-logo
  • butterfield-color-logo
  • chapin-sprayers-logo
  • treds rubber boots logo
  • metropolitan-concrete-products
  • marshalltown logo
  • kraft tool logo
  • major glove and safety logo
  • koolgator logo
  • surfkoat concrete sealers logo
  • wr meadows logo